Hibernation (Save-To-Disk) Feature - Fujitsu LIFEBOOK LH532 Guide D'utilisation

• Timing out from lack of activity.
• Allowing the battery to reach the Dead Battery Warning condition.
System memory typically stores the files on which you are working, open application information, and any other data
required to support operations in progress. When you resume operation from Sleep, your system will return to where
it left off. You must use the Power/Suspend/Resume button to resume operation, and there must be an adequate
power source available, or your notebook will not resume.
I
•
F RUNNING YOUR NOTEBOOK ON BATTERY POWER
,
MODE THOUGH NOT AS FAST AS WHEN FULLY OPERATIONAL
D
•
ISABLING THE
-D )
TO ISK
I
•
F YOUR NOTEBOOK IS ACTIVELY ACCESSING INFORMATION WHEN YOU ENTER THE
NOT LOST
HARD DRIVE DURING
T
HE MAIN ADVANTAGE OF USING
PARTICULARLY IMPORTANT IF YOU WILL BE LEAVING YOUR NOTEBOOK IN A SUSPENDED STATE FOR A PROLONGED PERIOD OF TIME
H
OF USING

Hibernation (Save-to-Disk) Feature

The Hibernation feature saves the contents of your notebook's system memory to the hard drive as a part of the
Power/Suspend/Resume mode. You can enable or disable this feature.
Enable or Disable the Hibernation Feature
The default settings are enabled. To disable or enable the Hibernation feature, follow these steps:
From the Modern Start screen, press [Windows]+[X]. Select Control Panel from the menu, then select Power
1
Options.
Select Choose what the power button does or Choose what closing the lid does, then make your selection (Do
2
Nothing, Sleep, Hibernate, or Shut Down).
P /S /R
OWER USPEND ESUME BUTTON PREVENTS IT FROM BEING USED TO PUT THE NOTEBOOK INTO
. T
MODE HE BUTTON RESUME FUNCTION CAN
. T
HE FILES ARE LEFT OPEN AND MEMORY IS KEPT ACTIVE DURING
H .
IBERNATION MODE
H
IBERNATION
IBERNATION MODE IS THAT IT LENGTHENS THE POWER DOWN AND POWER UP SEQUENCES AND RESETS PERIPHERAL DEVICES
,
BE AWARE THAT THE BATTERY CONTINUES TO DISCHARGE WHILE YOUR NOTEBOOK IS IN
.
' .
T BE DISABLED
S
LEEP MODE OR THE MEMORY IS TRANSFERRED TO THE INTERNAL
(S - -D )
AVE TO ISK IS THAT POWER IS NOT REQUIRED TO MAINTAIN YOUR DATA
40 - Power Management
S
LEEP OR
S H ,
LEEP OR IBERNATION MODE CHANGES TO OPEN FILES ARE
S
LEEP
H (S -
IBERNATION AVE
. T
HIS IS
. T
HE DRAWBACK
.