Page 2
The list of the Gamko Holding BV distributor in each country is shown in the attached table. In case of violation of the Directive, sanctions are set in each country.
DECLARATION CE DE CONFORMITE POUR LES MACHINES (Directive 2006/42/CEE, Annex II, Chapitre A) (Directive 89/392/CEE, Annex II, Chapitre A) Fabricant: Gamko Holding BV Fabricant: Gamko Holding BV Adresse: Mon Plaisir 75, 4879 AL Etten-Leur Holland Adresse: Mon Plaisir 75, 4879 AL Etten-Leur, Pays-Bas Déclare ci-après que...
Page 4
à travers un système collectif. Le lecteur trouvera la liste des distributeurs Gamko Holding BV dans chaque pays dans la table annexée à cette noti- ce. Les sanctions en cas de violation de la Directive sont établies dans chaque pays.
Page 5
SANDWICH COOLERS Gamko Sandwich Coolers are designed for the display and cooling of fresh food. Meets the new U.K. Food Hygiene Act. Cools from +2°C/+12°C. AV/MS (Picture 1) Sandwich Cooler with a condensing unit which can be sited at the left. The display unit has an interior fan motor for rapid pulldown and an even temperature throughout the cooler.
Dimensions Model Exterior Interior Storage (bxdxh) (bxdxh) Capacity AV/MS 91N 910x508x550 570x430x460 110 L. AV/MS 111N 1110x508x550 770x430x460 150 L. AV/MS 131N 1310x508x550 970x430x460 190 L. AV/MS 131GHN 1310x508x825 970x430x735 305 L. AV/MU 64N 643x608x790 585x530x440 135 L. AV/MU 84N 843x608x790 785x530x440 180 L.
Page 7
5. Clean the condenser at least once a month with a brush. 6. Do not cover the plate with air flow trenches. 7. The temperature in the Sandwich Cooler can be adjusted by the thermostat. As standard, this thermostat is set at about +2°C. (User manual 000030086) 8.
Page 8
Filling of the sandwich cooler When filling the Sandwich Cooler, you must ensure that the fans of the con- densing unit are not obstructed as these circulate the cold air (picture 5). To ensure maximum cooling time, replenish stocks regularly rather than once a day. Take care that the first cooled products are taken away first.
Compressor is out of order. The air flow trenches are covered. Solution: Check/Repair power supply. Replenish capacity more regularly. Clean the slideways. Call your local Gamko distributor. Call your local Gamko distributor. Clear the air flow trenches. Fault: Temperature is too low with correctly set thermostat. Cause: Thermostat is out of order.