Oxygen audio PULSION 12.1 Manuel D'utilisation page 33

11. Specification
Portable Amplifier Speaker
Power supply
Power consumption
Standby power consumption
FM tuner
Frequency response
Input sensitivity
Impedance
Speaker
Cable length
Dimensions
Remote control
Remote battery
Bluetooth
Bluetooth compatibility
Bluetooth version
12. Trouble shooting
In the unlikely event of difficulties with your appliance please follow the trouble
shooting guide below.
PROBLEM
No Power
POSSIBLE SOLUTION
 Ensure the mains plug is connected to a power supply,
and the device is switched ON. The POWER button
located at the rear side must be switched to AC mode.
 The device is in STANDBY mode, press the STANDBY
button on the remote to wake the unit from STANDBY
mode or press POWER button on the real panel of the
device.
Input: 110-240V ~ 50-60Hz
Output: 12V, 9A
45W
≤ 0.5W
87.5MHz-108MHz
100Hz-20kHz
1V
10k Ohm
12" BASS + 2 x 3" TREBLE
1.5 m
437 x 353 x 682mm
2 x CR2032
EDR, A2DP, AVRCP
2.1
- 32 -