Carbon Monoxide Detectors - DSC HS2TCHP Manuel De L'utilisateur

Masquer les pouces Voir aussi pour HS2TCHP:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Guidelines for Locating Smoke Detectors and CO Detectors
Figure 1
Figure 3a

Carbon Monoxide Detectors

Carbon monoxide is colorless, odorless, tasteless, and very toxic. It also moves freely in the air. CO detectors can
measure the concentration and sound a loud alarm before a potentially harmful level is reached. The human body
is most vulnerable to the effects of CO gas during sleeping hours; therefore, CO detectors should be located in or
as near as possible to sleeping areas of the home. For maximum protection, a CO alarm should be located outside
primary sleeping areas or on each level of your home. Figure 5 indicates the suggested locations in the home.
BEDROOM
BEDROOM
BEDROOM
KITCHEN
GROUND
FLOOR
BASEMENT
CARBON MONOXIDE DETECTOR
Figure 5
Do NOT place the CO alarm in the following areas:
Where the temperature may drop below -10ºC or exceed 40ºC
l
Near paint thinner fumes
l
Within 5 feet (1.5m) of open flame appliances such as furnaces, stoves and fireplaces
l
In exhaust streams from gas engines, vents, flues or chimneys
l
Do not place in close proximity to an automobile exhaust pipe; this will damage the detector
l
PLEASE REFER TO THE CO DETECTOR INSTALLATION AND OPERATING INSTRUCTION SHEET
FOR SAFETY INSTRUCTIONS AND EMERGENCY INFORMATION.
Figure 2
GARAGE
Figure 4
- 33 -
Figure 3

Publicité

Table des Matières
loading

Table des Matières