GE CustomStyle 22 Manuel D'utilisation page 28

Rehanging the doors.
Read these instructions completely and carefully.
Rehang the Fresh Food Door
Lower the fresh food door onto the bottom hinge pin.
1
Be sure the washer is in place.
Straighten the door and line it up with
2
the middle hinge bracket.
Reinstall the hinge pin with a 7/16" socket, tightening it
3
flush to the bracket.
Rehang the Freezer Door
Lower the freezer door onto the middle
1
hinge pin.
Lift the top hinge so the pin fits into the door socket.
2
Make sure the door is straight and the gap between
3
the doors is even across the front. Tighten the top
hinge screws, while holding the door in place.
To avoid scratching the corner cap, adjust the bottom
4
hinge pin so that there is a 1/16" (1.5 mm) gap between
the door stop and the top of the door corner cap.
Reinstall the top hinge cover.
5
28
Hinge Pin
Hinge Pin
Center Hinge
Bracket with
Cam Riser
Fresh Food Door
Center
Hinge Pin
1/16"
(1.5 mm)
Gap