ERMILA 0201 Mode D'emploi page 9

Cold-shot button (C):
By pressing the button and keeping it depressed, the hairdryer can be briefly switched to
cold air. To return to the set temperature, simply release the button.
· Using the on/off switch (F), switch off the appliance after use.
Styling with the nozzle
The nozzle can be used to direct the airflow onto the styling brush.
· Position the nozzle and press it towards the housing (Fig. 1ⓐ).
· To remove the nozzle, simply pull it off in the direction of the arrow (Fig. 1ⓑ).
Cleaning and care
· Disconnect from the mains before cleaning the appliance.
· Do not immerse the appliance in water!
· Only wipe the appliance with a soft cloth, which may be dampened slightly.
Do not use solvents or abrasives!
· To maintain the performance of your hairdryer, regularly clean the air inlet with a soft dry
brush.
To do so, proceed as follows:
· Twist the cover in an anti-clockwise direction (Fig. 2ⓐ) and remove.
· Clean the cover and air inlet with a soft brush (Fig. 3).
· Replace the cover and turn in a clockwise direction until it clicks into position (Fig. 2ⓑ).
Disposal in EU countries
Do not dispose of the appliance with domestic refuse. As part of the EU Directive
governing the disposal of electrical and electronic equipment, the appliance is
accepted free of charge by local waste collection points or recycling centres.
Correct disposal will ensure environmental protection and prevent any potentially
harmful impacts on people and the environment.
Disposal in non-EU countries
At the end of its service life, please dispose of the appliance in accordance with statutory
requirements.
ENGLISH
de
en
fr
it
es
pt
nl
sv
no
fi
tr
pl
cs
sk
hu
sl
ro
bg
ru
uk
el
ar
9