Filling The Device; Operation; Setting Spray Mode; Fitting The Collar - voss.pet Spray Trainer AB 3 Mode D'emploi

INSTRUCTION MANUAL VOSS.PET AB 3
7.3

FILLING THE DEVICE

As soon as LED (5) flashes red twice, the device must be refilled.
1. Turn off the device.
2. First let the air out of the tank by pressing down on the refill port (2) twice with a
screwdriver.
3. Insert the spray nozzle of the spray can from above into
the refill port (2) on the device.
4. To fill the device, press and hold the spray nozzle to the
refill port (2) for approx. 15 seconds (Fig. 3).
CAUTION
If spray leaks during the process, realign the spray
nozzle with the refill port.
8

OPERATION

8.1

SETTING SPRAY MODE

You can choose between two spray modes (strong / weak)
depending on the size of your dog. To select the spray mode,
press the setting button (3) once (Fig. 4).
Info
The default mode is „weak".
Weak: The LED (5) lights up green.
Strong: The LED (5) lights up red.
8.2

FITTING THE COLLAR

The correct fit and position of the collar is important for
effective operation.
5. Turn off the device.
6. Place the collar around your standing dog so that the
spray opening is perpendicular to the nose (Fig. 5) and
adjust to the correct size.
NOTICE
► Always leave a finger width of space under the
collar (Fig. 6).
► Long fur may need to be trimmed in some places
for proper fit and effective operation. Do not
shave the coat.
24550 - 03.2021 - 03
v
Fig. 3
Fig. 4
Fig. 5
Fig. 6
17
DE
EN
EN
FR
IT
NL
ES
PL