PCM GSC-1335-DEC Mode D'emploi page 2

English
1. To fix the tool holder on the machine,
introduce the shank and tighten the 2
fixation screws . Important, make sure
that the screws have the same strength of
tightening.
2. Mount the saw blade on the shaft..
Zone industrielle C
Rte du Grammont 101
CH-1844 Villeneuve
Mode d'emploi
Operating instructions
Betriebsanleitung
Istruzioni per l'uso
GSC-1335-DEC
3. Fix the saw blade using the nut. Use a
wrench to lock the spindle.
NOTE 1 :
PCM WILLEN SA
SWISS MADE
Copyright © PCM Willen SA.
Garant:
BT
Validation: 29.06.2016
Available shaft : Ø13mm
Tél ++41 21 967 33 66
Fax ++41 21 960 38 95
http://www.pcm.ch
email: office@pcm.ch
Document:
GSC-1335-DEC 1-
Mode d'emploi 1-
.docx
Page: 2 de 4