DO340DH
HOW TO OPERATE
HOW TO OPERATE
Your dehumidifi er will stop automatically after the hours set by the timer (2, 4, 8h)
If the unit is set to "Continuous" mode, the initial timer setting is "2H". You can
change the setting to '4H or "8H".
Plug in the dehumdifi er. The "automatic" mode lamp will fl ash. Make sure the water
tank is set properly.
Open one of the air outlet fl aps.
Press the "power" switch. "Automatic" mode lamp will light up.
Set the unit to the desired operation by pressing "mode" switch.
Press he "timer" button to select the operation time. The light will indicate the
remaining time.
The unit will stop operating after the time has lapsed.
Warning : to avoid damage to the power cord, do not pinch he cord in a door.
Be sure to prevent children from getting in a closet when using the unit in the closet.
Stop operating :
The mode select lamp will go off and the unit will stop operating.
Close the fl ap
Note :
Be sure to open the fl ap during operation. If the fl ap is not opened fully during
operation, the overheat prrevention device will work and the unit will stop operating.
Due to the protective function for the machine, the dehumidifying operation will be
started after approx. 3 min. When the unit is plugged in or restarted immediately after
stopped.
After recovery from a power failure, "automatic" mode lamp will fl ash. Press "power"
switch again to satrt the operation.
Effi ciency of the dehumidifi er is infl uenced by the air outside the room. For operating
effi ciently, try to avoid opening and closing the windows and the doors.
For proper performance, operate the dehumidifi er under the usable operating
temperature. For safety purpose, the dehumidifying operation will be stopped
automatically and changed to the air cleaning operation when the ambient temperature
is higher than approx. 36°C.
Circulation of the refrigerant may cause sound within the dehumidifi er when the
operation is started. After the circulation is stable, the sound will lower.
Except "continuous" mode, operation of the timer set will be cancelled whenever
"mode" switch" is pressed. Set the timer again after pressing "mode"switch, if
necessary.
The timer stops when the water tank is full of water. After the tank is emptied, the
timer will restart.
MAINTENANCE
Warning : to avoid electric shock, never plug in or unplug the unit with wet hands.