Tecomec Rivet Master Manuel D'utilisation Et Entretien page 6

ENGLISH
INSTRUCTION MANUAL ELECTRIC RIVETING
MACHINE FOR CHAIN SAW AND ELECTRIC CHAIN
SAW CHAINS
RIVET MASTER 230V
We would like to congratulate you on purchasing a RIVET MASTER
electric riveting machine. If used correctly, you will find this to be a fast,
convenient and precise working tool. To ensure maximum safety and
the best results every time, always carefully follow the instructions
in this manual. For safety reasons and to ensure the correct use of
the Riveting Machine, carefully read the operating instructions before
start-up. Each machine is accompanied by a copy of this manual.
Please take care of it!
Please note: The descriptions and illustrations contained in this
manual are not strictly binding.
The manufacturer reserves the right to bring about any
modifications without updating the manual.
1 MACHINE SYMBOLS
Important! The instructions marked with this symbol
followed very carefully.
Always wear protective eyewear.
Always wear protective gloves.
Electric shock hazard
Crush hazard
2 MACHINE SPECIFICATIONS
- Manufacturer: Tecomec S.r.l.
- Machine: RIVET MASTER electric riveting machine for chains.
DETAILS AND MODELS
- Models: RIVET MASTER 230V
- Installed power: Electric motor 50Hz 750W voltage 230V
- Top speed: (2780 min - 230V)
-1
- Sound pressure level: < 70dB (A)
- Types of chains that can be riveted: pitches 1/4" - .325" - 3/8" - .404"
/ 90SG-91-25AP-HARVESTER
- Weight of complete machine: 402 N (41 kg - 90.4 lb)
3 WARRANTY
- The validity of the warranty on the product is that recognized
in the country of sale. The warranty request is valid only if
accompanied by a copy of the purchase document (invoice or
sales receipt). For any repairs, the machine must be sent, freight
prepaid, to your dealer.
- The warranty will be void if:
a) the riveting machine has been tampered with;
b) the riveting machine has not been used as indicated in this manual;
c) the machine has been fitted with non-original and/or unauthorised
spare parts;
d) the riveting machine has been connected to voltages different
from those shown on the machine plate.
6 6
EN
4 SAFETY
4.1 GENERAL PRECAUTIONS
- The riveting machine must only be used by adults in good physical
condition and aware of how to use it.
- Do not wear bracelets, necklaces, chains, accessories or clothes
which could become trapped in moving parts.
- When operating the machine, always wear protective eyewear and
gloves.
- Do not use faulty and/or non-standard cables or extension leads.
- If the cable is damaged, immediately disconnect the plug from the
mains. Repairs must only be performed by authorised dealers or
after-sales centres.
- Power connections must be made in a way that prevents persons or
other machines from causing any damaging and creating hazardous
situations.
- Before starting the riveting machine, make sure the work area is free
of tools and other objects.
- Never allow unauthorised persons to stand near the riveting machine
or touch the power cable during operation.
- For maintenance purposes, always follow the instructions reported
below.
- Never work with a damaged or randomly-modified riveting machine.
- Never remove or damage or disable the safety devices.
- This riveting machine must only be used by expert operators who
are fully aware of how it works and how to use it correctly.
- Connect the riveting machine to a socket provided with a proper
must be
grounding contact; if in doubt, have it checked by qualified technicians.
- Always disconnect the plug from the socket before carrying out any
maintenance, lubrication or cleaning operations.
- Keep the work area well-lit.
- Do not use the riveting machine in the presence of flammable liquids
or gases.
- Protect yourself from electrical shocks. Do not touch with your body
any grounded metal surfaces which are not connected with the
machine.
- Do not pull the cable to disconnect it from the socket. Keep the cable
far from heat sources or sharp edges.
- Maintain a proper and balanced position while working.
- Always work in a stable and safe position, and be particularly careful.
- If the riveting machine does not start when the switch is turned to "1",
and if the riveting machine does not stop when the switch is in the "0"
position, immediately disconnect the power cable from the mains.
- Risk of damage due to accidental start-up. Do not use in a place
where children may be present.
- Always protect the machine against rain and excessive humidity.
- When the machine is not in use, store it in areas and/or premises not
accessible to children.
- When the machine is used outdoors using extension leads, make
sure these comply with applicable standards and that they are fit for
purpose.
- The machine should not be used when the operator is tired.
- For all repair operations and/or replacement of faulty or worn machine
parts not described in the operating instructions, always contact your
authorised dealer.
- The machine has been designed only to rivet chain saw and
power-saw chains as indicated in the Machine Specifications chapter.
4.2 RESIDUAL RISKS
The machine has been designed and made with the intention of
eliminating all risks related to its use.
The residual risks are specified below:
a) Electric shock
A sign indicating the risk of electric shock, as reported above, is located
on the connecting box and control panel, where a risk exists if these are
opened without previously disconnecting the machine from the power
supply. An electrical hazard also exists where there are electricity cables
that are not adequately insulated, which need to be replaced.