HQ Power HQPA10002 Mode D'emploi page 5

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
3.
Talk into the microphone. Use the same full voice you would normally use to be
heard in a conversation.
5.4
Using the System
General
key
M
VOL+
VOL-
USB/SD
1.
Switch on the system and MP3 function.
2.
Insert a USB stick or SD card into the respective input. The MP3 files will be played
automatically.
FM Radio
1.
Switch on the system and MP3 function.
2.
Select the FM menu.
3.
Search for your frequency.
Line Audio Input
1.
Switch on the system and MP3 function.
2.
Insert a standard audio cable with 3.5 mm plug into the audio input. You can now
use the PA system as an amplifier or recorder.
Microphone Input
1.
Switch on the system.
2.
Insert the included headset into the microphone input. Slide the microphone set
over your head. Place the microphone at a distance of 20-30 mm from your mouth.
3.
Talk into the microphone. Use the same full voice you would normally use to be
heard in a conversation.
4.
Insert a USB stick or SD card into the respective input, switch on the MP3 function
and enable the recording function to record.
Recording
1.
Switch on the system and MP3 function.
2.
Insert a USB stick or SD card into the respective input.
3.
Select the recording menu. Record through a microphone or the line input. The
recording will be saved as an MP3 or WMV file.
Settings
Set the calendar and other settings in their respective menu.
V. 01 – 12/06/2018
HQPA10002
MP3
submenu (short press)
system menu (long press)
play/pause
previous (short press)
fast rewind (long press)
next (short press)
fast forward (long press)
increase volume
decrease volume
5
FM
submenu (short press)
system menu (long press)
play/pause
- 0.1 MHz (short press)
auto search (long press)
+ 0.1 MHz (short press)
auto search (long press)
increase volume
decrease volume
menu
select
/
previous
next
/
/
©Velleman nv

Publicité

Table des Matières
loading

Table des Matières