Arris Touchstone WR2100 Guide D'installation Rapide page 6

Bottom & Side Panel
1. LAN port
2.
Power On/Off
Switch
3.
WPS Button
4. Reset Button
Use a standard Ethernet cable to connect your
WR2100 Wireless Repeater to a PC.
Press this button to turn on/off the WR2100
Wireless Repeater.
Press the WPS button on the device and on your
other wireless device to perform WPS setup that
easily creates an encryption-secured wireless
connection automatically.
 Access Point Connection. When pressed
and held over 3 seconds, the WR2100
Wireless Repeater performs WPS setup with
the wireless router/access point.
Client Connection. When pressed and

released (less than 3 seconds), the WR2100
Wireless Repeater will perform WPS setup
with the client devices.
This button is recessed. Use a pointed non-
metallic object to press this button. It can be
activated at any time the WR2100 Wireless
Repeater is in the "ready" mode.
 Reset to manufacturer default values and
reboot. When pressed and held for over 10
seconds, the settings of the WR2100
Wireless Repeater will be reset to their
default values.
4