Repeat Playback; Marking Desired Scenes; Changing Soundtrack Language - Sansui HDLCDVD225 Guide D'utilisation

Repeat playback

Title, Chapter Playback:
1
Press PLAY MODE during playback or stop
mode.
2
Press ENTER repeatedly to select "Chapter" or
"Title".
The unit automatically starts repeat playback
after finishing the current title or chapter.
• If you set the repeat mode during stop mode,
press PLAY to start Repeat playback.
Play Mode
Repeat : Off
3
Press PLAY MODE again to make the screen
disappear.
• In stop mode, press PLAY to start Repeat
playback.
• To resume normal playback, select Repeat
"Off" in step 2.
A-B Repeat Playback:
A-B repeat playback allows you to repeat material
between two selected points.
1
Press REPEAT A-B during playback.
The start point is selected.
A
2
Press REPEAT A-B again.
The end point is selected. Playback starts at the
point that you selected. Playback stops at the end
point, returns to Point A automatically, then starts
again.
3
To resume normal playback press REPEAT A-B
again.
" Off " appears on the screen.
NOTE:
• Some discs may not work with the repeat operation.
• In A-B repeat mode, subtitles near point A or B may
not appear.
• During the A-B Repeat Playback the ANGLE
feature will not operate.
• You may not be able to set A-B Repeat, depending
on the scenes of the DVD.
• A-B Repeat does not work with an interactive DVD,
MP3/WMA/JPEG-CD.

Marking desired scenes

The TV/DVD stores the points that you want to
watch again. You can resume playback from that
scene.
Marking the scenes:
1
Press MARKER during playback.
2
Select the blank Marker using ▲ or ▼, then press
ENTER at the desired scene.
Marker 1 00 27 54
Marker 2
Marker 3
• Up to 3 scenes can be selected.
• Repeat this procedure to set the other 2
scenes.
3
Press MARKER to remove this display.
Returning to the scenes:
1
Press MARKER during playback or stop mode.
2
Press ▲ or ▼ to select the Marker 1-3.
Marker 1 00 27 54
Marker 2 01 16 25
Marker 3 02 08 31
3
Press ENTER.
Playback starts from the marked scene.
To cancel the mark:
1
Press MARKER during playback or stop mode.
2
Press ▲ or ▼ to select the Marker 1-3.
3
Press CANCEL.
Press MARKER to remove this display.
NOTE:
• The marking is canceled when you eject the disc or
turn the power off.
• Some subtitles recorded around the marker may fail
to appear. [DVD]

Changing soundtrack language

You can select the language when you play a
multilingual disc.
1
Press AUDIO during playback.
The current soundtrack language will appear.
1/2 Eng Dolby Digital
2
Press AUDIO repeatedly until the desired
language is selected.
The on-screen display will disappear after a few
seconds.
NOTE:
• If the desired language is not heard after pressing
AUDIO several times, the language is not recorded
on the disc.
• Changing soundtrack language is canceled when
you eject the disc.
The initial default language or available language
will be heard if the disc is played back again.
27