Fine Tuning - Schaub Lorenz LT32-25645 Instructions D'utilisation

Move into SETUP by pressing
the down movement button.
Press OK on your remote
control and select "S" for cable
channels and "C" for channels
received via the antenna. Move
onto the PROGRAM NO tab
and enter the channel number in
which you would like to have the
channel stored. If the broadcast
SETUP
SYSTEM
CHANNEL
FINE TUNE
SEARCH
PROGRAM NO
STORE
AUTOPROGRAM
CHANGE
viewed on the screen is of your desired
quality, first move onto the STORE tab
with the down movement button to
store in the memory the selection you
have made and store the channel by
pressing the right or left movement
buttons. The prompt STORED will be
displayed briefly. The channel will be
stored according to the program number
of your choice. You can tune and store
in memory other channels the same way.
In the event that you wish to exit the
channel settings menu for any reason,
simply press the EXIT button.
6.3.2-If you do not know the channel
number
Press the MENU button. Move
to the SETUP menu by pressing
the down movement button in
Main Menu and confirm your
selection with OK button. The
Setup menu is displayed. Select
the system in which you would
like to make the search from
the System tab. Move into
SETUP by pressing the down
movement button. Press OK on
your remote control and select
"S" for cable channels and "C"
for channels received via the
antenna. Select SEARCH tab using
the up/down movement buttons, and
scan the channels in ascending order
BG
S06
0
P13
BACK
MENU
with Right movement button and in
descending order with Left movement
button. If the channel that is found is of
your liking, select the STORE tab and
press the right or left movement button
to store in the memory. Repeat the same
procedure for other channels by selecting
the program number of your choice from
the PROGRAM NO tab.
If the channel you found is not of the
SETUP
SYSTEM
CHANNEL
FINE TUNE
SEARCH
PROGRAM NO
STORE
AUTOPROGRAM
desired quality and requires Fine Tuning
or if you would like to rename the
channel, refer to the relevant sections.

6.4-Fine Tuning

If the channel you found is not of
the desired quality and requires
Fine Tuning, then select the
FINE TUNE tab by pressing the
downward movement button
in the Setup menu. Using the
right-left movement buttons
on your remote control, adjust
the broadcast displayed on the screen
to your desired quality. Under normal
circumstances, you will not require to use
the Fine Tune function. The AFC values
of your television will automatically adjust
and lock themselves to the channel.
However, you might need it in case the
television transmitters do not operate
according to the standards. To store in
the memory, the settings you have made,
select the STORE tab and press the
right or left movement button.
SETUP
SYSTEM
CHANNEL
FINE TUNE
SEARCH
PROGRAM NO
STORE
AUTOPROGRAM
11 I
k
BG
S06
0
P13
SEARCH BACK
MENU
BG
S06
0
P13
CHANGE BACK
MENU