Table des Matières
Publicité
6
TECHNICAL DATA
Parameter
Parameter value
description
Product name
Magnifying Lamp
Model
PHY-
PHY-
PHY-
-5ML-1
-3ML-1
-5ML-2
Rated voltage
230/50
[V~]/
Frequency [Hz]
Rated power [W]
12
7
Number of LEDs
60
90
[pcs]
LED lighting
1,350
750
power [lm]
Luminance [lx]
1,200÷2,520
920÷1,850
(35÷50cm)
Lamp life [h]
25,000
Lamp rotation
±100°
angle
Dimensions of the
5'' (Ø 127)
7,5''x6,2''
lens [mm]
(190x157)
Optical power
5
3
5
[dioptre]
Weight [kg]
2.5
3.7
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed and
manufactured in accordance with strict technical guidelines,
using state-of-the-art technologies and components.
Additionally, it is produced in compliance with the most
stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
ATTENTION! Electric shock warning!
ATTENTION! Fire hazard!
Only use indoors.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details it may
differ from the actual product.
The original operation manual is in German. Other
language versions are translations from German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire and/
or serious injury or even death.
The terms „device" or „product" are used in the warnings
and instructions to refer to <Magnifying Lamp>. Do not
use in very humid environments or in the direct vicinity of
water tanks. Prevent the device from getting wet. Risk of
electric shock!
2.1. ELECTRICAL SAFETY
a)
The plug must fit the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b)
Do not touch the device with wet or damp hands.
c)
Use the cable only for its designated use. Never
use it to carry the device or to pull the plug out of
a socket. Keep the cable away from heat sources, oil,
sharp edges or moving parts. Damaged or tangled
cables increase the risk of electric shock.
d)
If using the device in a damp environment cannot
be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of
electric shock.
2.2. SAFETY IN THE WORKPLACE
a)
Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
b)
Do not use the device in a potentially explosive
environment,
for
example
in
the
presence
of
flammable
liquids,
gases
or
dust.
The
device is equipped with a lens that can cause
a fire by focusing light on a small area and
rapidly increasing the temperature in this spot.
c)
If there are any doubts as to the correct operation of
the device, contact the manufacturer's support service.
d)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
e)
In case of fire, use a powder or carbon dioxide
(CO
)
fire
extinguisher
(one
intended
2
use on live electrical devices) to put it out.
f)
Please keep this manual available for future
reference.
If
this
device
is
passed
on
a third party, the manual must be passed on with it.
REMEMBER! When using the device, protect
children and other bystanders.
2.3. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience
and/or knowledge unless they are supervised by
a person responsible for their safety or they have
received instruction on how to operate the device.
c)
When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
d)
To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
e)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
b)
Make sure the plug is disconnected from the socket
before attempting any adjustments, accessory
replacements or before putting the device aside.
Such precautions will reduce the risk of accidentally
activating the device.
c)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
d)
Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
e)
Keep the device out of the reach of children.
f)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
g)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
h)
Do not leave this appliance unattended while it is in
use.
i)
Clean the device regularly to prevent stubborn grime
from accumulating.
j)
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
for
supervision by an adult person.
k)
Do not look directly or through the lens on the light
source. This can cause eye damage and epileptic
to
seizures.
l)
Do not leave the magnifying lens unattended in
places with direct sunlight as this creates a fire
hazard. After finishing work, remember to close the
lens cover.
m)
It is forbidden to direct the focused light beam
towards people or animals. It may cause burns.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The device is designed for viewing details at a larger scale
or as an aid during activities requiring high precision and
bright lighting.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
4
5
3
2
6
1
7
8
9
1.
Lamp head
2.
Lens with LED backlight
3.
Lens cover
4.
Clamp for adjusting head position
5.
Lamp arm
6.
Switch [I / 0]
7.
Lamp arm spindle
8.
Fixing clamp
9.
Screw clamp
10.
Power cord with plug (not visible in the picture)
3.2. PREPARING FOR USE
APPLIANCE LOCATION
The temperature of environment must not be higher than
40°C and the relative humidity should be less than 95%.
Ensure good ventilation in the room in which the device
is being used. There should be at least 10 cm distance
between each side of the device and the wall or other
objects. Keep the device away from hot surfaces. Operate
the device on an even, stable, clean, fire-proof and dry
surface and out of the reach of children and persons with
mental disabilities. Position the device such that you always
have access to the power plug. The power cord connected
to the appliance must be properly grounded and
correspond to the technical details on the product label
ASSEMBLING THE DEVICE
1.
Carefully unpack all components of the device and
check their condition.
2.
Apply the fixing clamp [8] to the edge of the chosen
flat surface, e.g. table or desk. The knob with the
screw clamp [9] should be underneath the flat
surface.
3.
By turning the screw of the clamp [9], fix the
mounting clamp [8] to the chosen surface.
7
Publicité
Table des Matières
