GreenWorks Tools SDS 24 V Notice D'utilisation page 3

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories, or
storing power tools. Such preventive
safety measures reduce the risk of
starting the power tool accidentally.
■ Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands
of untrained users.
■ Maintain power
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power
tool's operation. If damaged, have
the power tool repaired before use.
Many accidents are caused by poorly
maintained power tools.
■ Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
■ Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
Battery tool use and care
■ Ensure the switch is in the off position
before inserting battery pack. Inserting
the battery pack into power tools that
have the switch on invites accidents.
■ Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack
may create a risk of fire when used with
another battery pack.
■ Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
■ When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects, that can
make a connection from one terminal to
another. Shorting the battery terminals
together may cause burns or a fire.
■ Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from
English (Original Instructions)
tools. Check for
the battery may cause irritation or burns.
■ When using in direct sunshine, keep out
of water and don't exposure to rain.
■ Store indoors, and do not expose to rain
or water, avoid direct sunshine.
Service
■ Have your power tool serviced by
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool
is maintained.
HAMMER SAFETY WARNINGS
■ Wear ear protectors. Exposure to noise
can cause hearing loss.
■ Use auxiliary handle(s), if supplied
with the tool. Loss of control can cause
personal injury.
■ Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory or fastener
may contact hidden wiring. Cutting
accessory and fasteners contacting a
"live" wire may make exposed metal
parts of the power tool "live" and could
give the operater an electric shock.
ADDITIONAL SAFETY AND WORKING
INSTRUCTION
■ When transporting and storing, set
the rotational direction switch to the
centre position. Danger of injury when
accidentally actuating the On/Off switch.
■ Use appropriate detectors to determine
if utility lines are hidden in the work
area or call the local utility company
for assistance. Contact with electric
lines can lead to fire and electric
shock. Damaging a gas line can lead
to explosion. Penetrating a water line
causes property damage.
■ Firmly tighten the auxiliary handle, hold
the machine firmly with both hands
while working and keep proper footing
and balance at all times. The machine is
securely guided with both hands.
■ Secure the workpiece. A workpiece
clamped with clamping devices or in a
vice is held more secure than by hand.
■ For drilling without impact in wood,
metal, ceramic and plastic as well as for
screwdriving, tools without SDS-plus are
used (e.g., drills with cylindrical shank).
For these tools, a keyless chuck or a key
3