GB
USE
1
Place the ingredients in the container in this order: first liquids and fruit, then ice and other solid
foods.
2
Stand the container on the base fitting it into its support as shown in figure 3.
3
Fit the lid on the container so that the magnetic sensor is in contact with the end of the safety
arm. On model XB409 fasten the lid to the container using the special fasteners.
Note: When new, the lid of blender may require extra force to apply and remove. After a few
times it will fit perfectly.
Any attempt to by-pass the safety device and use the blender without its lid may cause
personal injury and/or damage to the appliance.
4
Select the desired speed and, holding one hand on the lid, select ON/OFF/PULSE switch to
"ON" - Fig. 4.
5
Most drinks require blending at high speed. Turn the switch to "LOW" only when preparing small
quantities or when using the blender just to mix the ingredients.
Drive
spline
Drive
spline
Fig. 3
15