How To Clean; Troubleshooting - Panasonic NT-ZP1 Mode D'emploi

How to Clean

Clean the appliance after every use.
 Unplug and make sure the appliance is cooled down completely.
Note
 ●
Do not use benzine, thinner, alcohol, bleach, polishing powder, metal brush or nylon brush, otherwise the surface
will be damaged.
 ●
Do not wash in a dishwasher.
Shake the main body lightly to allow crumbs inside to fall
onto the crumb tray.
To avoid breaking down.
 ●
Do not turn upside-down and shake.
(It may cause malfunction.)
 ●
Do not insert any instruments into the insertion slots.

Troubleshooting

Problem
The lever does not lock when
it is lowered.
The browning control, defrost
and reheat buttons do not
work.
Bread does not pop up after
toasting is finished.
Toasting colour is too dark or
too light.
14
Interior
 ●
 
The mains plug is not plugged in.

Plug it in firmly.
 
Toasting bread consecutively.

When operating the toaster for more than 4 cycles, rest the toaster
for more than 1 minute after each cycle.
 
The toast lever is not lowered.

Select either button after lowering the toast lever.
 
The browning control button does not work while reheating function is
on.
 
The bread is deformed.
 
The bread is too large or too small.
 
The bread is too thick.

Lift the lever up manually.
Use the appropriate size of the bread. (P.11)
 
The browning control is not set appropriately.
 
Toasting bread consecutively.

When operating the toaster for more than 4 cycles, rest the toaster
for more than 1 minute after each cycle.
Wipe with a well-wrung cloth.
Wash with diluted dish soap (neutral) and
a soft sponge.
Please check the following points
before arranging for service.
Cause
Exterior
Crumb Tray