Parts Names And Handling Instructions - Panasonic NT-ZP1 Mode D'emploi

Parts Names and Handling Instructions

The illustrations inside mainly show model NT-ZP1.
Please remove the protection seals from the appliance before use.
Insertion slot
Warming rack lever
Crumb tray
 ●
Slide out to remove.
Cord storage
 ●
Store the mains lead
as illustrated. Do not
set the mains lead in
the opposite direction.
Before you store the
mains lead, clean the
toaster as crumbs
may spill out. (P.14)
Note
 ●
When using the toaster for the first time, there may be a small amount some smoke or smell. This will disappear
with usage.
 
Size of bread
Thickness:
1~2 cm
8~12 cm
8~13 cm
NT-ZP1
Browning level
indicator
Browning control
button
Defrost button
Reheat button
Stop button
• Insert the bread with the longer side facing down.
• If the bread is too large, thick, thin or bread with uneven surfaces, it may get
jammed or caught inside of the toaster.
• If the bread is too small, it may get caught inside of the toaster or pop it up.
• If bread gets jammed, unplug the toaster, let it cool, and carefully remove the
bread. Otherwise it will keep toasting. Don't use anything sharp to remove the
bread, you'll damage the heating elements.
Warming rack
Toast lever
Browning level
indicator (For NT-ZP1)
Defrost indicator
(For NT-ZP1)
Reheat indicator
(For NT-ZP1)
NT-DP1
Mains plug
* The shape of the mains
plug may be different
from illustration.
Mains lead
 ●
Before using the toaster,
adjust the length of the mains
lead in these places.
11