Jrgb1: Rgb Led Connector; Ez Debug Led - MSI Z390-A PRO Présentation Rapide

JRGB1: RGB LED connector

The JRGB1 connector allows you to connect the 5050 RGB LED strips 12V.
⚠
Important
The JRGB1 connector supports 5050 RGB LED strip (12V/G/R/B) with the maximum
∙
power rating of 3A (12V).
Please keeping the LED strip shorter than 2 meters to prevent dimming.
∙
Always turn off the power supply and unplug the power cord from the power outlet
∙
before installing or removing the LED strip.
∙ Please use MSI's software to control the extended LED strip.

EZ Debug LED

These LEDs indicate the debug status of the motherboard.
24
Overview of Components
1
Extension cable
JRGB1
CPU - indicates CPU is not detected or fail.
DRAM - indicates DRAM is not detected or fail.
VGA - indicates GPU is not detected or fail.
BOOT - indicates the booting device is not detected
or fail.
JRGB1
1
1 +12V 2
3 R 4
5050 RGB LED strips 12V
G
B