MSI Z390-A PRO Présentation Rapide page 15

Internal Connectors
I/O Controller
Hardware Monitor
Form Factor
Continued from previous page
∙ 1x 24-pin ATX main power connector
∙ 1x 8-pin ATX 12V power connector
∙ 1x 6-pin ATX 12V power connector
∙ 6x SATA 6Gb/s connectors
∙ 2x M.2 slots (1 M-Key slot,1 E-Key slot)
∙ 2x USB 3.1 Gen1 connectors (supports additional 4 USB
3.1 Gen1 ports)
∙ 2x USB 2.0 connectors (supports additional 4 USB 2.0
ports)
∙ 1x 4-pin CPU fan connector
∙ 1x 4-pin Water Pump connector
∙ 5x 4-pin system fan connectors
∙ 1x Front panel audio connector
∙ 2x System panel connectors
∙ 1x Chassis Intrusion connector
∙ 1x 4-pin RGB LED connector
∙ 1x Serial Port connector
∙ 1x Clear CMOS jumper
∙ 1x Parallel port connector
∙ 1x TPM module connector
∙ 1x thunderbolt Add-on card connector
∙ 1x Front OC button connector
NUVOTON NCT6797 Controller Chip
∙ CPU/System temperature detection
∙ CPU/System fan speed detection
∙ CPU/System fan speed control
∙ ATX Form Factor
∙ 12 in. x 9.6 in. (30.5 cm x 24.4 cm)
Continued on next page
5
Specifications