Description Of Symbols - Silverline 791721 Mode D'emploi

GB

Description of Symbols

The rating plate on your tool may show symbols. These represent important information
about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction Manual
DO NOT use in rain or damp environments!
For indoors use only!
T-130˚
Class II construction (double insulated for additional protection)
Environmental Protection
Waste electrical products and batteries, including Li-ion batteries, should
not be disposed of with household waste. Please recycle where facilities
exist. Check with your local authority or retailer for recycling advice.
Conforms to relevant legislation and safety standards.
Caution!
Technical Abbreviations Key
V
~, AC
A, mA
Ah
n0
n
Nm
°
Ø
Hz
, DC
W, kW
/min or min -1
rpm
F
dB(A)
m/s
2
4
Volts
Alternating current
Ampere, milli-Amp
Amp hours (battery capacity)
No load speed
Rated speed
Newton metres (torque)
Degrees
Diameter
Hertz
Direct current
Watt, kilowatt
Operations per minute
Revolutions per minute
Farad (capacitance)
Decibel sound level (A weighted)
Metres per second squared (vibration magnitude)
Original Instructions
Specification
Power: ........................................................................................................3.6V
No load speed: ....................................................................................190min
Max torque: ............................................................................................... 4Nm
Ingress protection: .....................................................................................IPX0
Weight: ...................................................................................................0.38kg
Battery:
Cell type ...................................................................................................Li-ion
Voltage .................................................................................................3.6V, DC
Capacity ............................................................................................ 1300mAh
Charger:
Input power .................................................................... 230-240V~ 50Hz, 5W
Output power .............................................................................6V DC, 300mA
Charging time: ....................................................................................... 3-5hrs
Protection class ...........................................................................................
As part of our ongoing product development, specifications of Silverline products
may alter without notice.
Sound and vibration information:
Sound Pressure LPA: ......................................................................... 61.3dB(A)
Sound Power LWA: ............................................................................ 72.3dB(A)
Uncertainty K:............................................................................................. 3dB
Weighted Vibration ah(Main Handle): ................................................ 0.409m/s²
Uncertainty K:....................................................................................... 1.5m/s²
The sound intensity level for the operator may exceed 85dB(A) and sound protection
measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and
limit the time of exposure if necessary. If sound levels are uncomfortable, even with ear
protection, stop using the tool immediately and check the ear protection is correctly fitted
and provides the correct level of sound attenuation for the level of sound produced by
your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do
not operate the tool with hands below a normal comfortable temperature, as vibration will
have a greater effect. Use the figures provided in the specification relating to vibration to
calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745
or similar international standards. The figures represent normal use for the tool in
normal working conditions. A poorly maintained, incorrectly assembled, or misused tool,
may produce increased levels of noise and vibration. www.osha.europa.eu provides
information on sound and vibration levels in the workplace that may be useful to domestic
users who use tools for long periods of time.
-1