Basic Connections - Aiwa HV-FX9000U Mode D'emploi

2
Connecting Antenna (or CATV)-VCR-TV

Basic connections

1
Connect the TV
antenna cable (not
supplied) to the
VCR.
AC outlet
4
Connect the AC cord
of the VCR to the AC
outlet.
Important
Connect the AC cord to the AC outlet after all of the connections are complete.
When the TV is connected to OUT TO TV using only an antenna cable
Set the channel selector to 3CH or 4CH, not employed for broadcasts, and select the same channel on the TV.
2
Connect the VCR with the
supplied antenna cable to the
TV's antenna input connector.
Antenna input
connector
TV antenna cable (not supplied)
AC cord
To select a desired TV channel on the TV
Turn the TV and VCR on, and press TV/VCR to turn off
AERIAL
AERIAL
VCR in the display window, or turn off this VCR.
(VHF/UHF)
(VHF/UHF)
RF OUT
RF OUT
3CH 4CH
3CH 4CH
2
TV
Antenna cable
(supplied)
AERIAL
R AUDIO L VIDEO
OUT OUT
(VHF/UHF)
RF OUT
(MONO)
IN IN
LINE 1
3
If your TV has audio/video
input jacks, connect the VCR
and TV using the supplied
audio and video cables.
Audio/video
input jacks
Video cable
(supplied)
Audio cable
(supplied)