Waldhausen W-Health & Care Mode D'emploi page 15

3-5 sec.
VIBRATION
CONSTANT PULSATING
VIBRATION VIBRATION
3-5 sec.
HEAT
50° 45°
4
After the horse boot has been
supplied with power, the horse boot is
switched on using the Vibrate or Heat
button. Please select the button of the
desired function. To do so, the button
must be pressed for 3–5 seconds. The
horse boot will then switches on at the
fi rst level.
5
To change the level, again, press the
button for 3–5 seconds, then the horse
boot will switch to the next level.
To switch the horse boot off again, press
the button of the feature being used
SLOW-
PULSATING
(Vibrate or Heat button) for about 3 to 5
VIBRATION
seconds.
40°
English
15