Technibel KPSW Manuel D'installation page 13

2.2 - ACCESSORIES SUPPLIED WITH THE UNIT
Accessory
Plugs
Screws 4 x 30
(wall bracket fi xing)
Wall bracket
Fullscall diagram
Instructions
1 Installation instructions.
1 Operating instructions.
Clamper
Side panels
(right or left)
2.3 - WEIGHT
• Net weight : 23.5 kg
• Packed weight : 31 kg
3 - INSTALLATION
3.1 - CHOOSING THE LOCATION
Select the location for the unit on the basis of the following
criteria:
• The device is intended for installation in sheltered premises
(IP20). Do not install in very damp places or exposed to
projections of water (e.g., laundry rooms).
• Do not install next to electric connections.
• The air intake and blowing grilles must be free from any
obstacle so that blowing can occur correctly in the whole
room.
250 250
3000
ty
Q
2 Screws 4 x 10
(panels fi xing)
2
Insulation
(for connections)
1
Seal
(cover protection)
1 Side brackets
Washers
2
Bolts H M8
1
2
Special washers
2.4 - DIMENSIONS
190
• The wall on which the air handler will be fi xed must be
suffi ciently thick for there not to be any resonance and so
as not to produce any noise.
• Provide for the pipes and electric cables.
• It is essential to leave the clear space around the unit (see
drawing below).
THREE INSTALLATION POSSIBILITIES:
• On the fl oor,
• On a wall,
• Under the ceiling.
250
Accessory
900
250
3000
max 400
F
ty
Q
4
GB
I
1
E
1
D
2
4
4
4
3