Operating The Appliance; Switching Off; Switching On - Ellrona Comline 3400 Mode D'emploi

15.4 Operating the Appliance

15.4.1

Switching Off

15.4.2

Switching On

Ellrona Comline 3400
The appliance is switched off using the On/Standby key.
When you switch off the device via "On/Standby" and the
temperature of the cooker plate surface is lower than 50° C, the
display shows "-L-". When the temperature of the cooker plate
surface is over 50 ° C, it is displaying "-H-".
Note that the appliance's fan continues to operate for a
while after the appliance has been switched off in order to
dissipate the heat that has built up in the appliance.
If the appliance is unused for an extended period of time
unplug, the appliance from the socket in order disconnect it
from the mains power supply.
Follow the instructions below in order to operate the appliance
safely.
Plug the mains plug into the power socket.
The control lamp of the ON/Standby switch lights up and the
temperature of the cooker plate surface displayed: is the
temperature of the surface of the induction cooker lower than
50° C, the display shows "-L-". When the temperatu re of the
cooker plate surface is over 50 ° C, it is displayin g "-H-". An
acoustic signal sounds. Now the device is in standby mode.
Place a suitable cooking pot with its contents to be
cooked on the centre on the hob (Ø 120 mm - 260 mm).
Do not place any empty cookware on the ceramic field.
Heating an empty pot or pan activates the overheating
protection and the device turns off.
As soon as the induction cooker is switched on the appliance
determines within 60 seconds whether suitable pots and pans
are being used. If a suitable cooking vessel has not been
recognised within 60 seconds the appliance returns to Standby
mode.
If a suitable cooking vessel has been recognised, the appliance
heats up to the set temperature.
Operation and Handling
Please note
56