Smartwares smarthome connect kit Manuel D'utilisation page 18

Start the 'Configuration Tool' and go through the steps to allow the
3
HomeWizard to connect to your WI-FI network.
Tip! Click 'Scan again' if your wireless network is not displayed in the list of
available wireless networks. Is your wireless network still not visible in the list of
wireless networks? Check the settings of your router.
Tip! If the HomeWizard is unable to verify the network, it is possible that the
user name and/or password of your wireless network have not been properly
completed. It can also be caused by the security settings of your router. For
instance: If you have a WEP encryption, you will need to adapt it to WPA or
WPA2.
Tip! Make notes of your HomeWizard data on the last page of this manual.
Remove the mini USB connector from the HomeWizard and connect the
4
HomeWizard to the electrical outlet with the supplied adapter.
Tip! For optimal range, place the HomeWizard in a central location in the
house. Do not place the HomeWizard within a radius of 50 centimetres of the
router.
You will receive an automatic email with login information of your
5
HomeWizard Online Account.
18 Installation instructions – smarthome connect kit