Prodipe A1 Duo Manuel Utilisateur page 6

Dear Customer,
We would like to thank you for the confidence you have placed in us by purchasing a Prodipe product.
A new generation of condensor Professional Microphones for Studio and Live recording.
Specially designed for all round use, this condensor microphone picks up sound equally as well live as in the
studio.
Its construction meets all the required technical criteria, giving it an undeniable musical quality - sound
clarity, high accuracy and acoustic fidelity.
This model is particularly recommended for stringed instruments such as violin, viola, cello, double bass
and acoustic guitar.
The A1 duo is supplied with two mounts and two shields.
Usage:
1. Turn on your amplifier or mixing board and set the volume control to minimum position.
2. To connect the phantom power to the microphone turning on the phantom switch, accommodate
the volume control from low to high so obtained effect to your moderate level for protected the
sauna from pounding.
3. If the head of the microphone is covered by hand or brought close to the speaker, a howling sound
may be generated. To prevent this, first decrease the volume, then place the microphone so that it
is not pointed to the speaker and that there is a sufficient distance between the microphone and
speaker.
4. The sensitivity of cartridge is very fine, Don't do drop. Hit it or apply strong shock to it.
5. To maintain the sensitivity and quality of sound reproducing, avoid exposing it to moisture and
extreme temperatures.
6. The related specification or deployment are subject to change without any prior notice.
Specifications:
Element: Pressure Gradient Transducer
•
Capsule: Ø 22 mm
•
Polar Pattern: Uni-directional
•
Frequency Response: 30Hz~18kHz
•
Sensitivity: -38dB±2dB(0dB=1V/Pa at
•
1kHz)
Output Impedance: 100Ω±30% (at 1kHz)
•
Load Impedance: ≥1000Ω
•
Illustrations et photos non contractuelles
Actual product(s) may differ from illustrations/photographs used
Copyright © 2016 IPE Music/Prodipe
Self Noise: 20dB A (IEC 581-5)
•
Max Input SPL: 134dB (at 1kHz≤1% T.H.D)
•
S/N Ratio: 74dB
•
Low Frequency Attenuation: 100Hz/oct 12dB
•
Phantom Power Requirement: 48V DC Phantom
•
(±5V)
Net Weight: 120g
•
Page 6