Publicité
Les langues disponibles
Les langues disponibles
PSU connected
Detected HDMI source
Press
/
to access the output channel menu / attenuation / program ID
•
Press
+
/
•
Press
+
/
•
Press
+
/
•
Press
while connecting the power supply Factory default values. "rs" will
•
appear on the display.
For advanced settings, download the SW "
•
www.ekselansbyits.com
and connect the modulator to the computer by using a
Type A / Type B USB cable.
Note: In case of using more than one modulator for the same receiver or TV set, it
•
is necessary to modify the "Program ID" so that they have different values.
to set the output channel [5...12 + 21...69]
to set the desired attenuation [0...15dB]
to modify the Program Id.
EK_MDHDSoft
EN
" from the website:
Publicité
