König Electronic DMR-STICK6 Mode D'emploi page 4

12. Telephone recording.
13. 32-level volume adjustment.
14. High-speed USB 2.0 connection, to facilitate rapid uploading/downloading.
15. Built-in loudspeaker.
16. Low power alerting.
17. Key locking: Turn on HOLD key to lock all keys at any work mode.
Battery Device
1) Open battery cover.
2) Install one AAA battery at correct direction of positive/negative electrode, close battery cover.
3) Turn on to check remaining battery power. At low power state, the system prompts shows
automatically "Lo batt" and then turns off the voice recorder. At low power during recording or
pausing, the system prompts "Lo batt" automatically, saves current recording fi le, and turns off
the recording. Power scale is full at suffi cient battery volume, and decreases gradually with the
decrease in battery volume.
4) At <2 scales of battery power, the recording pen stops playing to turn off due to insuffi cient power
for built-in function operation. Decrease sound volume or use headset at playing. Battery service
time varies with battery type and playing volume.
Warning:
1. While in use, don't remove the battery. When "Busy" is displayed don't retract the USB cable from
the PC. Otherwise the following might happen: program disorders, problems with opening the
program and that the program disappears.
Operation
Turn on/off and time checking:
• Turn on/off: Turn on HOLD key before battery installation, and the recording starts automatically
after battery installation. Press & hold "POWER" key for 2 seconds in the off state to start the
recording, display memory capacity, display current time, enter record standby mode.
Turn off automatically in case of no key operation within 2 minutes at standby mode, and press &
hold "POWER" key for more than 2 seconds to turn off at ordinary time.
• Time Checking: At stop state, press "POWER" key to inquire current time (display successively
Year-Month-Day-Hour-Minute, and return automatically to stop state.
3