Function Keys And Display Elements - 3B SCIENTIFIC 3B LASER PEN 200 mW Manuel D'utilisation

Function Keys and Display Elements

1 LASER
2 + / -
3 SET
4 POWER
5 Display
6 LED
7 Battery compartment
8
Red connector
9 Charging contacts
10 Black connector
11 Contact surface
12 waveguide
13 Charging station with
power supply unit
Last revised 16.02.12
11
7
The laser is activated/deactivated with this key.
The values selected with the SET key can be changed with these keys.
The values can be selected and stored with this key.
The 3B LASER PEN 200 mW is switched on and off with this key.
The selected laser power level, operation mode, point search mode, therapy time, and
dose rate as well as information about the battery charge are shown on the display screen.
This LED above the LASER key indicates whether the laser has been activated. An error in
the laser diode operation is indicated by a red light. When this happens, please contact
our technical service.
Battery compartment Is at the bottom of the housing.
Red connector Connector for the key pin
Charging contacts for the charging station
Connector for storing the key pin
For the point search
Laser beam outlet
For charging the batteries
12
6
1
3
2
4
5
8/9/10
13
21