vapanion TAROT NANO Manuel D'utilisation page 55

OPERATING & CHANGING THE VAPING MODES
Setting the Modes TC-Ni/TC-Ti/TC-SS (Temperature Control) and TCR (Temperature Coefficient
of Resistance)
1. In the TC-Ni, TC-Ti, and TC-SS modes, the device can be used with coils made of Nickel 200, titanium, or 316
stainless steel. In the variable temperature mode, you can adjust the temperature value according to personal
preference. In TCR mode, the temperature value correlates with the resistance of your atomizer head coil. The
device is capable of supporting various temperature control coils in diverse TCR ranges. You enter the TCR
selection menu by pressing the Mode button three times in the TC-Ni, TC-Ti, or TC-SS mode:
a. Press the Mode button to switch between the M settings.
b. Press the Plus or Minus button to adjust the TCR value that's relative to the material of your atomizer head
coil.
c. TCR value range for different materials:
Material
TCR Value Range
Notes: The TCR values listed in the table are the actual TCR value multiplied by 10
The TCR value range is 1 to 1000.
Heruntergeladen von manualslib.de
Nickel NiFe
600–700 300–400
Handbücher-Suchmachiene
Titanium SS SS (303,304, 316, 317)
300–400
.
5
VAPANION
TAROT NANO
80–200
53