FS FMT Modules d'Infrastructure Guide De Démarrage Rapide page 15

DC Power
2. Plug the power cord into the power port on the back of the managed chassis.
3. Connect the other end of the power cord to a power outlet.
4. Press the button to turn on the power.
NOTE:
1. Turn o the AC/DC power before connecting.
2. The chassis can be powered by one AC power supply or two AC power supplies.
3. Ensure proper connection for all wires.
4. Tighten the wire with a screwdriver after full insertion.
5. Do not install power cables while the button is on.
14