Vision TM-LCD TECHMOUNT Guide De L'utilisateur page 12

ENGLISH
3. Attach the 4 x TM-LCD mounts to the wall following the
steps 3-5 on the previous pages. The brackets should be
positioned so that the marks you made on the template
are visible at the bottom of the keyhole on the TM-LCD
wall mount.
WARRANTY
This product comes with a 2-year return to base warranty,
effective from the date of purchase. This warranty applies
only to the original purchaser and is not transferable. For the
avoidance of doubt, this will be taken from the information
held by the appointed national distributor at the point of
sale. The liability of the manufacturer and its appointed
service company is limited to the cost of repair and or
replacement of the faulty unit under warranty, except for
death or injury (EU85/374/EEC). This warranty protects you
against the following:
• Faulty wields resulting in the product not safely performing
its task within the recommended SWL (safe working load).
• Poor finishing resulting in the product not being able to be
assembled.
• External corrosion if identified within 24 hours of purchase.
The inside of the pipe is not powder-coated, so light
corrosion may develop over time. This is normal and does
not adversely affect the load-bearing capability of the
product, therefore it is not covered in this warranty.
10