EIBENSTOCK EPO 1401 Notice Originale page 11

Technical Data
Dry Polisher EPO 1401
Rated Voltage:
Power Input:
Rated Current:
Order no.:
Frequency:
Rated Speed:
Max. Diameter of the Tool:
Collet:
Protection Class:
Degree of Protection:
Weight:
Interference Suppression:
Dry Polisher with operating instructions in a cardboard box.
Application for Indented Purpose
The polisher EPO 1401 is indented for professional use. Together with the
appropriate tool it is made in order to grind, polish and smooth stone, wood,
metal etc.
Safety Instructions
Safe work with the machine is only possible if you read
this operating instruction completely and follow the
instructions contained strictly.
Additionally, the general safety instructions of the leaflet
supplied with the tool must be observed. Prior to the first
use, the user should absolve a practical training.
If the connection cable gets damaged or cut during the use,
do not touch it, but instantly pull the plug out of the socket.
Never use the tool with a damaged connection cable.
Do not use the tool near explosive materials (petrol, dilution).
Do not work with materials containing asbestos.
Modifications of the tool are prohibited.
Always check the tool, cable and plug before use. Have damages only
repaired by specialists. Only insert the plug into the socket when the
tool switch is off.
When the machine runs outside, always use a protection switch
(30 mA max.) against fault current.
Supply
50 - 60 Hz
700 - 3300 rpm
125 mm
M 14 male thread
II
IP 20
about 2,3 kg
EN 55014 and EN 61000
11
230 V ~
1400 W
6.0 A
055A1