General Use & Safety Warnings - VITO PRO-POWER VIBCSCSFL20 Mode D'emploi

EN
BOX CONTENT
1 Circular saw VIBCSCSFL20
1 Parallel guide
1 Instruction manual
SYMBOLOGY
Safety warnings and
precautions.
All users must read the
instruction manual to
avoid injuries.
Risk of electric shock.
Hazard of fire or
explosion.
Risk of cutting.
Double insulation.
Respect the safety
distance.
Recycled material
packaging.
Separate collection of
batteries and / or power
tools.
2. GENERAL USE &
SAFETY WARNINGS
While using
equipment, several
safety precautions must always be
followed in order to reduce the risk
of fire, electric shock and personal
injuries.
Read and understand the
manual prior to operating this
tiller. Save these instructions and
other documents supplied with this
machine for future reference.
2.1 - GENERAL
These preventive
essential for your safety. Always use
this machine with care in a responsible
manner having in consideration that
its user is responsible for eventual
accidents caused to third parties or
their goods.
Make sure that all individuals using this
tool have had the necessary training
and have read and fully understand
these operating instructions. Before
operating it for the first time, its user
must be instructed by the vendor
or a competent person about its
functionalities.
This instruction manual is an integral
part of the tool and must always be
provided.
Get familiar with the equipment's
control devices and operation. The user
must know how to stop the equipment
immediately.
Always pay attention when operating an
electric tool. A moment of inattention
may result in serious injuries.
Use this equipment only if you are in
good physical and mental conditions.
Do not use it if you are tired or under
the influence of alcohol, drugs or
medication. If you suffer from any
health problem, please ask your doctor
about the possibility of using the tool.
Never allow this machine to be used by
agricultural children, people with limited physical,
basic sensorial or mental capabilities, with
lack of experience and knowledge of
this equipment and who is not familiar
with the instructions.
This tool must only be operated
as described in this instruction
manual. No other use is allowed
besides the described.
Do not overload the equipment and use
it properly for each type of work. Using
it for purposes other than the intended
may result in dangerous situations.
For safety reasons, any changes
other than the assembly of the discs
measures are authorized by the manufacturer are
prohibited. Any changes made void the
warranty.
You can obtain any information about
the authorized discs through your VITO
official distributor.
2.2 - ELECTRICAL SAFETY
every external metallic part is isolated
from
Therefore, and in accordance with the
regulation EN 60745, it is not
necessary
However, double isolation does not
replace the regular safety precautions
that must be followed while using the
equipment.
Do not expose any power tools to
rain or use them in wet or damp
environments. The presence of water
in an electric tool increases the risk of
damage and electric shock to the user.
Hold the equipment by the isolated
parts; this procedure avoids the electric
shock if the machine touches any
hidden wire during the operation.
especially in the presence of flammable
liquids, gases or dusts. Any power tool
may form sparks that might ignite
liquids, gases, or dust.
2.3 - BEFORE OPERATING
Make sure that this tool is only used
by who is familiar with the instruction
manual.
To ensure a safe operation, you must:
� Check the machine before using
it. Check if the discs are correctly
assembled and in good conditions. In
case of damages or excessive wear,
replace them;
This tool possesses double
isolation, which means that
the electric components.
any earth connection.
Do not use this tool in an
explosive environment,
23