er
items of clothing on its hanger, etc.
at
To do so, follow the instructions:
to
- Select the maximum temperature
of the iron, while turning the
by
temperature regulator of the iron in a
es.
clockwise direction (Fig. 2).
n
- Move the iron in a top to bottom
direction while pressing the steam
m
control (G).
Important: for cotton and linen,
se
it's recommended to put the iron
e
base in contact with the material.
C)
For other more delicate fibres, it's
ly,
recommended to keep the iron base
ion.
at some centimetres of distance.
r
Once you have finished using the
appliance:
- Select the minimum position (MIN)
mum
via the temperature control dial.
ut
- Unplug the appliance from the
g.
mains.
- Remove the water from the deposit.
Temperature safety protector:
- The device has a temperature safety
protector, which protects the device
from overheating.
Cleaning
to
- Disconnect the appliance from the
uous
mains and allow it to cool before
y
undertaking any cleaning task.
- Clean the equipment with a damp
cloth with a few drops of washing-up
liquid and then dry.
ows
- Do not use solvents, or products
with an acid or base pH such as
bleach, or abrasive products, for
cleaning the appliance.
- Do not submerge the appliance in
ains,
water or any other liquid, or place it
under a running tap.
How to deal with lime scale
incrustations:
- For the appliance to work correctly
it should be kept free of lime scale or
magnesium incrustations caused by
the use of hard water.
- To prevent this kind of problem, we
recommend the use of distilled water.
- However, if it is not possible to
use the kind of water recommended
above, you should periodically remove
the lime scale from the appliance:
- Every 6 weeks if the water is "very
hard".
- Every 12 weeks if the water is
"hard".
- To do so, we recommend the use
of the specific product Taurus Decal,
which can be found in specialised
shops and authorised technical
services.
- Homemade solutions are not
recommended in the descaling of this
appliance, such as the use of vinegar.
Cleaning the detachable water heater
- Check that the appliance has cooled
down (wait at least 3 hours after
disconnecting the appliance)
-Empty the water deposit (J) first and
later the detachable water heater
- To empty the detachable water
heater open the stopper lid of the
boiler (k) and unscrew the deposit
lid (L) in an anti-clockwise direction.
(Fig. 5)
- Empty the water boiler and close
it by screwing on the stopper and
turning it in a clockwise direction.
- Fill the water deposit J with