Installing The Camera; Description Of The Camera - Extel WESVCM 82501 Guide D'installation Et D'utilisation

4

INSTALLING THE CAMERA

a. Description of the camera
CAUTION
1
2
3
4
1. Adjustable antenna to be screwed at the back of the camera.
2. Protection of the cameras (IP 44).
3. Lens of the camera.
4. Screw to fix the position of the camera.
5. Camera bracket.
6. Microphone (in the empty part of the housing).
7. Plug to connect the adaptor.
8. Cell to activate the IR diodes, in the darkness.
9. Infrared diode (non visible lighting system)
10. Red light indicator, confirming the power supply of the camera.
11. Green light indicator, indicates that the camera is displayed on the monitor.
12. Fixing screw for the U-bolt
13. Button to associate the camera with its monitor
14. 5 VDC Adaptor
Be sure any element does not avoid inserting the screws
in the wall.
11
10
7
3 8 9
CFI EXTEL WESVCM 82501 - 06/2009 - V1
12
13
14
6
5GB