Important - BST CDU-200R Manuel D'utilisation

4 CDU-200R
•

IMPORTANT

Use of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
CLASS 1 LASER
The built-in CD players contain a class 1 laser. DO NOT STARE INTO THE BEAM!
WARNING
CAUTION
DO NOT OPEN THE HOUSING
SHOCK HAZARD
DESCRIPTION OF THE FRONT PANEL CONTROLS
1. EJECT button: Press to open or close the CD tray. If a CD is playing, stop the play first and then press the
button to open the tray.
2. PLAY/PAUSE BUTTON: Each time you press the Play/Pause button, the operation changes from Play
to Pause or from Pause to Play.
3. CUE BUTTON: Press the Cue button during play to return to the position where the play has started.
4. SOURCE button: Press this button to choose among CD, USB or FM radio mode
5. TIME button: The TIME button switches the time display between elapsed time, remaining time or total
remaining time.
6. REPEAT: Press the REPEAT button once to activate the function and repeat the selected track. Press
REPEAT again to activate the REPEAT ALL function and repeat all tracks on the CD. Press the REPEAT
button again to deactivate the repeat function.
7. RELOOP BUTTON: Use this button to start the last saved loop. To finish the loop, press the RELOOP button
again.
8. LOOP IN BUTTON: Sets the starting point of your loop. The loop indicator on te display flashes.
9. LOOP OUT BUTTON: Sets the end point of your seamless loop and starts the playback of the loop. Press
again to exit the loop.
10. CONT./SINGLE: Pressing the SINGLE button activates the SINGLE mode. In this mode, the player will
play one song and then stop. Press the button again to activate the CONTINUOUS mode causing the unit
to play continuously. After the last track, the unit will return to the first track on the disc and continue to play.
STEREO: In FM mode, press this button to change audio between mono and stereo