Installation; High Pressure Connection - Interpump QUIKY TURBO 11.50 Mode D'emploi

4.2 - ID LABEL
Before using this machine make sur e that it has an ID
label. If it is without, do not use the machine and
consult your dealer immediately.
The identification label with technical specifications
is placed on the trolley and is always visible.
Check that ID label specifications corr espond to
those required and that the power characteristics
for the outlet (V/Hz) are those shown on the label.

5.1 HIGH PRESSURE CONNECTION

1- Connect one end of the high pr essure hose to the gun (A) and the other to the outlet con-
nection (B).
2. WARNING: Complete the assembly of the lance by fitting together its thr ee
component parts (gun, extension and terminal), tightening the sleeves (C) fully .

5 - INSTALLATION

Replace the r ed
travel plug (1)
with the vented
b l a c k / y e l l o w
dipstick provided
(2).
8
Check that the oil in the sight glass is at
the half-way level.