Canon CS100 Mode D'emploi page 59

Sending an approval request
First, send an approval request from a Connect Station to the Connect Station of the
contact.
Before performing this operation, check the recipient's Email address (the one that

the recipient Connect Station has registered with CANON iMAGE GATEWAY).
It is recommended to use one nickname for a CANON iMAGE GATEWAY account.

Up to ten approval requests you sent or received can be saved. Registered contacts

and approval requests can be saved up to twenty in total. The number of approval
requests which can be saved may be altered due to the specification change of
CANON iMAGE GATEWAY.
Select [Request sharing
1
approval].
Press the <g> key.
2
Enter the Email address.
3
Select [Contact Email address],

press <S>, then enter the
recipient's Email address.
If necessary, you can also enter

your nickname and the recipient's
nickname (the names to be
displayed).
Press <M>.
4

An approval request will be sent.
Note that just sending an

approval request does not
register the contact.
57