Publicité
1. HAND GRIP INCORPORATING ON/OFF SWITCH
2. DUST EXTRACTION OUTLET
3. LOWER GUARD
4. UPPER GUARD
5. AUXILIARY HANDLE
6. LOWER GUARD RETRACTING LEVER
7. FOOT LOCKING KNOB
THE PICTURES BELOW INTEND TO MAKE YOU FAMILAR WITH DIFFERENT FUNCTIONS OF YOUR CIRCULAR SAW.
THESE PICTURES MAY NOT SHOW THE ACTUAL CIRCULAR SAW MODEL THAT YOU HAVE PURCHASED. BEFORE
ANY INTERVENTION, YOUR CIRCULAR SAW MUST BE DISCONNECTED FROM THE POWER SOURCE.
PICTURE 2 – 7: APPROPRIATE POSITIONS AND
POSITIONS TO AVOID
PICTURE 1
PICTURE 2
CHECK IF THE UPPER AND LOWER GUARDS ARE
APPROPRIATELY FIXED TO PREVENT ANY PHYSICAL
INJURY FROM HAPPENING WHILE THE CIRCULAR
SAW IS IN OPERATION.
THE PARALLEL GUIDE MUST BE MOUNTED ON THE
CIRCULAR
SAW
TO
ENSURE
LINEALITY OF THE CUT.
PICTURE 1 SHOWS THE APPROPRIATE POSITION FOR
THE USER. YOU SHOULD NOT ALIGN YOURSELF
RIGHT BEHIND THE CIRCULAR SAW (PICTURE 2) TO
AVOID BEING HIT BY THE SAW KICKBACK.
IN FACT, IN CASE YOUR SAW IS PINCHED, YOUR SAW
BOUNDS BACKWARD AND YOU RUN THE RISK OF
BEING HURT BY THE SAW KICKBACK CHOCS.
PICTURE 3
PICTURE 4
Ref.: 647062
8. TUNGSTEN CARBIDE BLADE (NOT PROVIDED)
9. BLADE BOLT
10. BLADE FLANGE
11. FOOT
12. BLADE HEX WRENCH
13. PARALLEL GUIDE
CIRCULAR SAW IN OPERATION
PICTURE 4 SHOWS HOW YOU MUST POSITION
YOURSELF WHEN OPERATING A CIRCULAR SAW. THE
SMALLER OF THE 2 PIECES OF THE WORK BEING
CUT OFF MUST BE LOCATED ON THE SIDE THAT WILL
NOT HIT YOU WHEN THIS SMALLER WORK PIECE IS
CUT OFF.
DO NEVER USE THE CIRCULAR SAW THE WAY IT IS
POSITIONED IN PICTURE 7. THIS INAPPROPRIATE
SAW
STABILITY
AND
UNPROTECTED.
WE REMIND YOU THAT YOU SHOULD ALWAYS GRIP
FRIMLY THE SAW BY YOUR TWO HANDS. NEVER PUT
ONE OF YOUR HANDS IN FRONT OF THE SAW OR
BEHIND THE SAW TO AVOID BEING CUT BY THE SAW
BLADE IN ROTATION (PICTURE 8).
AJUSTING THE DEPTH OF THE CUT AT 90 DEGREES
11
PICTURE 5
PICTURE 6
POSITION
WILL
LEAVE
PICTURE 7
THE
USER
Publicité
