General Information; Set Up & Operation - HAEGER Grandmother KS-MEC.005A Mode D'emploi

Dear customer
Thank you for having chosen a HÆGER product.
The HÆGER products have been produced to think about the welfare of the consumer
privileging the most raised standards of quality, functionality and assign. We are sure
you will be happy with this appliance.
We assume that the user is familiar with the common procedures of handling
household appliances.
In order to ensure the scale continues to deliver peak performance, please read these
operation instructions carefully and thoroughly prior to initial usage.

General Information

1. Read all instructions before operating the scale.
2. Follow the basic safety precautions for all office equipment when using this
scale.
3. The manufacturer does not warrant this unit to be waterproof. Do not expose
this product to rain or moisture.
4. Do not use the scale under sun or keep it away from heating appliances such as
oven, stove, etc.
5. This scale does not contain any user-serviceable parts. Do not disassemble.
6. Use the scale for its intended purpose only.
Note: The display value may be affected by electromagnetic influences in the
immediate vicinity of the device.
Description
A - Screw
C - Cross Rack
E - Holding rack
G - Dial
Set Up & Operation
• Wash the bowl in warm soapy water.
• Place the scale on a flat surface before using.
• As shown in the diagram provided, fix the support platform to the top of the
scales, using the two nuts and bolts provided.
• Put the bowl into the supports provided. Adjust the pointer to zero by turning
the adjustment screw being careful not to unscrew it altogether.
Instructions for use
B - Bowl
D - Waterproof plate
F - Adjusting screw
GB
1