Domo DO265HD Mode D'emploi page 24

LED
WARM
TIMER
MIST
ON/OFF
The device will not work if the water reservoir is empty. The mood lighting switches on and off twice to
indicate that the reservoir must be filled. Fill the water reservoir as described above.
LED
WARM
TIMER
MIST
ON/OFF
ON/OFF SWITCH
MER MIST ON/OFF
Press the power button on the device to turn it on. Press again to switch the device off.
o/Mi/Hi)
ATOMISING VOLUME
ARM
TIMER MIST ON/OFF
h)
The atomising volume can be changed with this button. The default setting is low atomising volume.
Button
Press the button several times to switch. The indicator light for the selected volume lights up.
OFF)
me Button(Lo/Mi/Hi)
· Lo: low
tton(2h/4h/6h)
· Mi: middle
LED
WARM
TIMER
MIST
ON/OFF
m Button
· Hi: high
t Button(ON/OFF)
You can adjust the mist direction by turning the openings in the lid to the desired position.
LED
TIMER WARM
TIMER
MIST
ON/OFF
WARM
ED TIMER MIST ON/OFF
Use the timer button for automatic switch-off. You can set the timer to 2 hours, 4 hours and 6 hours. Press
ON/OFF Button
the button several times to switch. The indicator light for the selected time lights up.
Mist Volume Button(Lo/Mi/Hi)
Timer Button(2h/4h/6h)
WARM MIST MODE
WARM
LED TIMER
Cool/Warm Button
Press the warm mist mode button to activate the heating function. The indicator light lights up. The
LED Light Button(ON/OFF)
ON/OFF Button
heating function ensures the humidifier works at optimum efficiency. By spreading warm mist, a pleasant
Mist Volume Button(Lo/Mi/Hi)
air humidity is reached even faster. For this function, the atomising volume will automatically be changed
Timer Button(2h/4h/6h)
to Hi: high. You cannot change this yourself.
Cool/Warm Button
LED Light Button(ON/OFF)
LED LIGHTING
WARM
LED
Press the LED lighting button to switch on the device's ambient lighting. The indicator light lights up.
ON/OFF Button
Mist Volume Button(Lo/Mi/Hi)
OIL COMPARTMENT
Timer Button(2h/4h/6h)
Push the oil compartment on the side of the device. Remove the compartment by pulling it towards you.
Cool/Warm Button
Place an aroma pad in the compartment. Dose 5 - 7 drops of essential oil on the pad. You can add more or
LED Light Button(ON/OFF)
less as desired. Attention: only add oil to the device using the pad. Never add oil to the water tank. Put the
compartment back in the device.
Tip: use a different aroma pad for each fragrance.
LED
24
DO265HD
MIST ON/OFF
LED
WARM
TIMER
MIST
ON/OFF
TIMER MIST ON/OFF
WARM
TIMER
MIST
ON/OFF