Domo DO265HD Mode D'emploi page 23

PARTS
1. Handgrip
2. Water reservoir
3. Water reservoir cap
4. Filter
5. LED lighting
6. Base
7. Cover with mist opening
8. Air outlet
9. Ultrasonic membrane
10. Cord
11. Oil compartment
CONTROLLER
12. On/off switch
13. Atomising volume
14. Timer
15. Warm mist mode
16. LED lighting
LED
16
ON/OFF Button
USE
Mist Volume Button(Lo/Mi/Hi)
FILLING THE WATER TANK
Timer Button(2h/4h/6h)
1. Remove the lid and lift the reservoir from the base.
Cool/Warm Button
2. Turn the water reservoir upside down, open the cap at the bottom of the device and then fill the
reservoir with pure mineral water (bottled water or tap water).
LED Light Button(ON/OFF)
3. Put the reservoir back on the base. Use the recesses to ensure the reservoir is properly aligned
before use. Put the lid back on the reservoir.
4. Plug the power cord into a socket. The device is now ready for use.
OFF ST ON/OFF
Attention: water may remain in the base. Be careful with spills.
www.domo-elektro.be
LED
WARM
TIMER
MIST
ON/OFF
WARM
TIMER MIST
LED
15 14 13
1.
1
2
3
4
5
LED
6
WARM
TIMER
MIST
ON/OFF
WARM
TIMER
12
ON/OFF Button
Mist Volume Button(Lo/Mi/Hi)
Timer Button(2h/4h/6h)
Cool/Warm Button
LED Light Button(ON/OFF)
2.
7
8
ON/OFF
9
MIST ON/OFF
3.
10
11
4.
23
DO265HD