Safety Instructions - ANSMANN PHOTOCAM III Mode D'emploi

USA GB
Operating instructiOns
use Of tHe cHarger
The PHOTO CAM III is a microprocessor controlled plug-in charger for 2 or 4 nickel metal hydride
(NiMH) or nickel cadmium (NiCd) batteries of the sizes Micro AAA or Mignon AA. It is recommended
that you only charge batteries of the same size and capacity at the same time to ensure optimum
charging of all cells (see picture 1).
features
> Suitable for charging 2 or 4 NiMH or NiCd batteries of the sizes Micro AAA or Mignon AA
> Microprocessor controlled charge
> Double protection against overcharging (-dV; safety timer)
> Trickle charge after termination of fast charge
> Charging status indicator via LED
> Reverse-connect protection
indicatOrs
LED red: steady light indicates fast charging
LED green: steady light indicates the termination of the fast charging process of circular cells. The fully
charged batteries are provided with a trickle charge and can remain in the charger for an unlimited
period of time until they are needed.
attentiOn
Only insert Nickel Metal Hydride (NiMH) batteries or Nickel Cadmium (NiCd) batteries. Danger of
explosion if other types of batteries are inserted.
Please note that the charger is suitable to charge only fast rechargeable NiMH or NiCd batteries. Never
try to charge alkaline, zinc-carbon, lithium or other types of batteries.

safety instructions

> Keep the charger in a dry place (indoor use only).
> In order to avoid the risk of fire and/or electric shock, the charger must be protected against high
humidity and water.
> Do not plug in the charger if there are any signs of damage to the housing or mains plug pins.