Operation; How To Split A Log With Slant Surface - Texas Andreas Petersen Power Split 2000 VH Guide D'utilisation

Operation

Proper Operation of the Log Splitter
1.) Load a log onto the beam and against the endplate.
2.) Serious accidents can happen when other people are allowed inside the work zone.
Keep everyone else out of the work zone while operating control valve.
3.) Make sure hands are clear of crush hazard zones.
4.) Push control valve handles FORWARD by two hands to split log.
5.) When handles are released, the wedge stops moving.
6.) Pull control valve handles BACKWARDS by two hands to return wedge to its original
position.
7.) Clear the split wood from the work zone.

How to split a log with slant surface

Wrong Better Best