Assembling The Co Alarm - Olympia KM 200 Mode D'emploi

Do not assemble CO alarms
• near a window or door because fresh air fl owing in
could cause a delay in the alarm triggering
• in the direct vicinity of a cooking area
• in closed containers or concealed areas
• in the vicinity of extractor fans
• in wet or damp areas
• directly above sources of heat
• outside the permissible ambient conditions (refer to
Technical Data)

Assembling the CO Alarm

When assembling the device, pay attention to maintaining
at least 100 cm distance to doors, windows or ventilation
ducts�
1
Carefully turn the base counterclockwise and remove
the base from the CO alarm�
35