Cleaning And Maintenance - BORETTI Nutri Frulli B210 Mode D'emploi

STEP 7: Turn the bottle upside down, remove the blade assembly from the bottle and screw
the drinking lid on to the bottle. This way you can take the bottle with you as a drinking bottle.
CONTROL PANEL
The first indicator light lights up if the glass jug is positioned correctly in the base and the plug
is connected to the wall socket. This is the standby mode.
1. START/STOP: press the button to start the blender. When the ingredients are mixed as
desired, press the same button to stop the mixing. While mixing, all of the indicator lights
will light up.
2. AUTO: press this button to run the blender for one minute. The mixer will start and stop
in repeating intervals of several seconds, making a smooth blend of the ingredients. The
indicator lights indicate the speed of the mixing. If you wish to interrupt the automatic
function, press this button again or press the start/stop button.
3. PULSE: press and hold this button for several seconds to mix the ingredients. The harder
you press this button, the faster the blender will mix. This is also reflected in the indicator
lights.
1
2
« CLEANING AND MAINTENANCE
Attention: The edges of the blades are very sharp. Cleaning the blender has to be done
carefully.
1. Pull the plug from the socket and disassemble the accessories before cleaning the
appliance.
2. Use a damp cloth to clean the outside of the blender base. Never immerse the blender
base in water or other liquids.
3. Except for the base, you can clean all parts in water: the drinking lid, the blending bottle
and the blade assembly.
4. When not using the blender for a longer period of time, save it in a well ventilated, dry
place to prevent the engine of the appliance from being affected by humidity.
3
33
EN