Important; Safety Regulations; Proper Use; Technical Data - BorMann BID1200 Traduction De La Notice Originale

Caution - Read the operating
instructions to reduce the risk of
inquiry
Wear ear-muffs.
The impact of noise can cause damage
to hearing.
Wear a breathing mask.
Dust which is injurious to health
can be generated when working on
wood and other materials. Never use
the device to work on any materials
containing asbestos!
Wear safety goggles.
Sparks generated during working or
splinters, chips and dust emitted by
the device can cause loss of sight.

Important!

When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual
with due care. Keep this manual in a safe place,
so that the information is available at all times.
If you give the equipment to any other person,
give them these operating instructions as well.
We accept no liability for damage or accidents
which arise due to non-observance of these
instructions and the safety information.

1. Safety regulations

The corresponding safety information can be
found in the enclosed booklet.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety
regulations and instructions may result in an
electric shock, fire and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
14
2. Layout (Fig. 1)
1. Drill chuck
2. Drill depth stop
3. Drill/hammer drill selector switch
4. Locking button
5. ON/OFF switch
6. Speed controller
7. Clockwise/Counter-clockwise switch
8. Additional handle
9. Speed selector switch

3. Proper use

The drill is designed for drilling holes into wood,
iron, non-ferrous metals and rock using the
appropriate bits.
The equipment is to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user / operator and not
the manufacturer will be liable for any damage
or injuries of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be
voided if the machine is used in commercial,
trade or industrial businesses or for equivalent
purposes.

4. Technical data

Mains voltage:
Power input:
Idling speed 1:
Idling speed 2:
Drilling capacity Concrete
Protection class:
Weight:
Sound and vibration
Sound and vibration values were measured in
230-240 V ~ 50 Hz
1200 W
-1
0-1,000 min
-1
0-2,800 min
13 mm
Steel 10 mm
Wood 25 mm
II /
3.1 kg